Official Luthiers Forum!
http://www-.luthiersforum.com/forum/

First cigar box ukulele
http://www-.luthiersforum.com/forum/viewtopic.php?f=10128&t=47843		 Page 1 of 1
Author:  edstrummer [ Wed Jun 01, 2016 10:14 pm ]
Post subject:  First cigar box ukulele
ImageImage

I had a friend give me a nice cigar box found at an estate sale and I build a soprano uke with it using some parts I had and some bought from Mike H, owner of Mainland Ukukele. Really nice guy. When I strung 'er up and played I noticed some forward lean at the saddle. And some other problems. Tie bridge coming loose. So I made some narrow braces from left over spruce and glued then to bottom of soundboard, and I made a bridge patch and added two brass screws into tie bridge. Seems pretty tight. Used hhg from John Hall and like it. Easy clean up. Its a gift for a friend.
Ed

Sent from my SM-T230NU using Tapatalk
Author:  unkabob [ Mon Jun 06, 2016 11:00 am ]
Post subject:  Re: First cigar box ukulele
Looks good.
Would a Hana-Llma style tie through bridge have worked better for your bridge problem.

Bob [uncle]
Author:  edstrummer [ Thu Jun 16, 2016 6:11 am ]
Post subject:  Re: First cigar box ukulele
The top distorted noticeably before the bridge came loose so fixing both problems was my goal and it worked. I will check with my friend to see if it has held up.

Sent from my SM-T230NU using Tapatalk
Author:  edstrummer [ Wed Jun 22, 2016 10:20 pm ]
Post subject:  Re: First cigar box ukulele
So far the repairs I made are working very well. My friend loves her new uke.

Sent from my SM-T230NU using Tapatalk
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/